МАНУАЛЫ

CANON BJС-6200

КОДЫ ОШИБОК
Error Condition Indicator BEEPS Error
Code
Possible Solution
Paper Feed/Delivery Orange 2   Remove any paper jammed
Paper Jam Orange 3   Remove any paper jammed
Ink Out Orange 4   Add Ink
BJ Cartridge Mismatch Orange 5   Re-install cartridge or replace it. See notes below for correct positions
NO BJ Cartridge Orange 6   Re-install cartridge or replace it
BJ Cartridge Error Orange 7   Re-install cartridge or replace it
Waste Full warning Orange 8   Waste is almost full, needs service very soon
Auto Head Adjustment Error Orange 9   Is there Black and Cyan ink ?
AutoAlignment requires Black and Cyan inks.
ROM Error 1 x Orange 10   Try unplugging the printer for 30 seconds, if not requires service.
RAM Error 2 x Orange 10   Try unplugging the printer for 30 seconds, if not requires service.
EEPROM 3 x Orange 10 6800 Try unplugging the printer for 30 seconds, if not requires service.
Home Position 4 x Orange 10 5100 Make sure nothing is blocking the cartridge movement, if not requires service.
Temperature Sensor 5 x Orange 10 5400 Try unplugging the printer for 30 seconds, if not requires service.
Waste Full 6 x Orange 10 5B00 Needs Service
Cartridge OverHeat 7 x Orange 10 5200 Replace the BJ Cartridge(Printhead)
Cartridge Overheat 8 x Orange 10 5200 Replace the BJ Cartridge(Printhead)
Cartridge Displaced 9 x Orange 10 5600 Replace the BJ Cartridge(Printhead) or reinstall
  None None 5910 Needs Service
  None None 5C00 Needs Service

Сброс кода ошибки переполнения отстойника - "памперса"

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data


© E.Semenov, 2002-2003