МАНУАЛЫ

CANON BJС-600

КОДЫ ОШИБОК

Power	Beeps	Error	Online	BK	C	M	Y	Env	Thick	Error Condition	Solution
On		Off	On							Ready
On	2	On								Paper jam or out of paper	Add paper or remove the paper jam and press ONLINE to continue
On	2							Blink	Blink	WASTE INK warning	You can continue printing by pressing ONLINE however the printer is due for service
On	2							Blink	Blink	INK OUT - The printer is out of INK, Note any combination of BK, C, M or Y may blink	Replace or check the ink cartridges that have BLINKING lights - BK = Black, C = CYAN, M = Magenta, Y = Yellow
On	3	Blink							On	This indicates Carriage Error (Printhead movement)	Requires Service
On	3	Blink						On		Home Position Error (Printhead movement)	Requires Service
On	3	Blink						On	On	Encoder Error (Printhead movement)	Requires Service, Though See Notes Below
On	3	Blink					On			Purge Error	Requires Service
On	3	Blink					On		On	Paper Feed Motor Error	Requires Service
On	3	Blink					On	On		Auto Sheet Feeder Home Position Error	Requires Service
On	3	Blink					On	On	On	Internal Temperature Error	Requires Service
On	3	Blink				On				WASTE INK is FULL	Requires Service
On	3	Blink				On			On	This indicates EEPROM Error	Requires Service
On	3	Blink		On						ROM Error	Requires Service
On	3	Blink		On			On			RAM Error	Requires Service
On	3	Blink				On		On		Gate Array Error	Requires Service
On	3	Blink						Blink	Blink	PrintHead Error	Requires Service, Possibly remove printhead and reinstall may resolve problem. Any combination of BK,C,M,Y may be be blinking

Сброс кода ошибки переполнения отстойника - "памперса"

1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps

If you receive an encoder error, try the following,

• Power off the printer
• Unplug the printer power cord
• Hold PRINT MODE and POWER buttons and plug in the printer's cord
• Release the buttons after the tones (beeps)
• Wait until the printer finishes, and power off
• Unplug the printer
• Plug it back in