Power |
Error |
Beeper |
Error/Cause |
Solution |
Off |
Off |
|
No Power |
|
On |
Off |
|
Ready State |
|
On |
On |
1 |
Paper Pickup Error or
out of paper |
Add Paper or clear paper jam
and press the Resume |
On |
On |
2 |
Paper Jam |
Clear paper jam and press
the Resume |
Blinks |
Off |
|
BJ Cartridge not detected |
Install BJ Cartridge or replace.
You will notice the carriage will be in the middle position. |
Blinks |
Blinks |
1 |
RAM Error |
Unplug the printer for 20 seconds, if problem
persists then printer Requires a Service. |
Blinks |
Blinks |
2 |
ROM Error |
Unplug the printer for 20 seconds, if problem
persists then printer Requires a Service. |
Blinks |
Blinks |
3 |
Cartridge not detected |
Try replacing the cartridge, if this fails
then the printer requires service |
Blinks |
Blinks |
4 |
Home Position Error |
Remove the cartridge and check to make sure
nothing is blocking the path of the carriage, if not then
the printer requires a service |
Blinks |
Blinks |
5 |
Waste Full |
Requires Service |
Blinks |
Blinks |
6 |
Temperature Sensor Error |
Try replacing the cartridge, if this fails
then the printer requires service |
Blinks |
Blinks |
7 |
Print Position |
Unplug the printer for 20 seconds, if problem
persists then printer Requires a Service. |
Blinks |
Blinks |
8-9 |
Head temperature or sensor
error |
Try replacing the cartridge, if this fails
then the printer requires service |
Blinks |
Blibks |
10 |
Cleaning Error |
Remove the cartridge and check to make sure
nothing is blocking the path of the carriage, if not then
the printer requires a service |