| Главная | Новости | Каталог дисков | Заказать | Коды сбросов | Ссылки | Отзывы | Контакты | |||||||||
МАНУАЛЫ
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Error Condition | Indicator | Beeps | Error Code |
Possible Solution |
| Paper Feed / Delivery | Orange | 2 | Remove any paper jammed | |
| Paper Jam | Orange | 3 | Remove any paper jammed | |
| Ink Out | Orange | 4 | Add Ink | |
| BJ Cartridge Misinstalled | Orange | 5 | Re-install cartridge or replace it | |
| NO BJ Cartridge | Orange | 6 | Re-install cartridge or replace it | |
| BJ Cartridge Error | Orange | 7 | Re-install cartridge or replace it | |
| Waste Full warning | Orange | 8 | Waste is almost full , needs service very soon | |
| Service Errors | Blinks | Beeps | Error Code |
Possible Solution |
| ROM Error | 1 x Orange | 10 | 6100 | Try unplugging Printer |
| RAM Error | 2 x Orange | 10 | 6300 | Try unplugging Printer |
| EEPROM | 3 x Orange | 10 | 6800 | Try unplugging Printer |
| Home Position | 4 x Orange | 10 | 5100 | |
| Temperature Sensor | 5 x Orange | 10 | 5400 | Try unplugging Printer |
| Waste Full | 6 x Orange | 10 | 5B00 | Needs Service |
| Cartridge OverHeat | 7 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
| Cartridge OverHeat | 8 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
| Cartridge Displaced | 9 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) or reinstall |
| Cartridge Displaced | 10 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) or reinstall |
| Cartridge Displaced | 11 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) or reinstall |
| Other Hardware error | 12 x Orange | 10 | 6500 | |
| Other Hardware error | None | None | 5910 | Needs Service |
| Other Hardware error | None | None | 5C00 | Needs Service |
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will
sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times.
The indicator should be orange.
6: Press Power to set data.