The BJC-2000 does not beep or have any LEDs to indicate
errors. All errors are reported via the computer with error messages.
| Error Condition |
Error Indication
on Computer |
Error
Code |
Possible Solution |
| Paper Feed |
The Printer is out of paper |
|
Add Paper |
| Paper Jam |
A paper jam has occurred |
|
Remove any paper jammed |
| Cover is open |
The printer's front cover
is open |
|
Close the front panel |
| No cartridge |
BJ Cartridge error occured |
|
Install the BJ cartridge properly
and close the printers front cover. |
| Head Mismatch |
An incorrect cartridge was installed in the
printer. |
|
Insure the scanner IS cartridge is installed
when scanning or the BJ Cartridge is installed when printing |
| EEPROM |
An error that possibly requires a service
call has occurred |
6800 |
Try unplugging the printer for 30 seconds,
if not requires a service. |
| Home Position |
An error that possibly requires a service
call has occurred |
5000 |
Make sure no obstructions are blocking the
cartridge movement, if not needs service. |
| Carriage Error |
An error that possibly requires a service
call has occurred |
5100 |
Try unplugging the printer for 30 seconds,
if not requires a service. |
| Temperature Sensor |
An error that possibly requires a service
call has occurred |
5400 |
Try unplugging the printer for 30 seconds,
if not requires a service. |
| No Cartridge Error |
An error that possibly requires a service
call has occurred |
5600 |
Try reinstalling Cartridge or replacing the
cartridge |
| Waste Full |
An error that possibly requires a service
call has occurred |
None |
Needs Service |
| Cleaning Error |
An error that possibly requires a service
call has occurred |
5C00 |
Make sure no obstructions are blocking the
cartridge movement, if not needs service. |
| Scanner IS-22 |
An error that possibly requires a service
call has occurred |
5210 |
|